1. Solved Ni Max On Labview For Mac

This document contains the MAX 16.0 and System Configuration 16.0 known issues that were discovered before and since the release NI System Configuration 16.0. Not every issue known to NI will appear on this list; it is intended to only show the severe and common issues. The following items are known issues in MAX 16.0 and NI System Configuration 16.0 KIL sorted by Date. — — — — ID Known Issue MAX 16.0 shows 'Inconsistent IP Settings' for remote systems and is missing local network adapters on the Network Adapters tab for My System. MAX 16.0 shows 'Inconsistent IP Settings' for remote systems and is missing local network adapters on the Network Adapters tab for My System. Workaround: Upgrade to MAX to 16.0.1 using or update to the Reported Version: 16.0 Resolved Version: 16.0.1 Added: Setting time and timezone together fails on Linux ARM cRIOs When setting the current time and timezone together in MAX or the WIF, a Linux ARM cRIO will fail to correctly set the current time.

And lowers costs for test, control and design applications through easy-to-integrate software, such as NI LabVIEW, and modular measurement and control hardware for PXI, PCI, PCI Express, USB and Ethernet. Laboratory Virtual Instrument Engineering Workbench (LabVIEW):3 is a system-design. Originally released for the Apple Macintosh in 1986, LabVIEW is commonly used for data acquisition. To coincide with the annual National Instruments conference NI Week, and followed by a bug-fix release the following February. Home Support Determine the Version of the NI Software Installed on My Computer. Click the Apple Logo a the top left of the screen and select About This Mac. On the Screen that opens. In NI MAX, the default bit-ness for LabVIEW is 32-bit; if no bit-ness is specified in the LabVIEW version name, it is 32-bit (i.e. LabVIEW 2017 f2).

Workaround: Save the timezone and time in two different steps or put the target in the UTC timezone, save, and then change both the timezone and time. Reported Version: 16.0 Resolved Version: N/A Added: Installing/Uninstalling Real-Time software components to Real-Time targets in MAX fails when LabVIEW Real-Time Software is installed to path with non-English characters Users are unable to install/uninstall Real-Time software components using the Real-Time Software Wizard in MAX when LabVIEW Real-Time Software is installed to a path with non-English characters, such as a path Japanese characters. Workaround: Install LabVIEW Real-Time Software to default path. Reported Version: 16.0 Resolved Version: N/A Added: System Configuration Restart.vi throws error - after setting a Real-Time target to a static IP address on Mac When setting a static IP address of a Real-Time target on Mac, Restart.vi throws error. Workaround: After setting the IP address, close the System Configuration session, open a new session and then call Restart.vi on the target. Reported Version: 14.0 Resolved Version: N/A Added.

This document has been archived and is no longer updated by National Instruments. The following items are known issues in NI-VISA 5.4.x Known Issues sorted by Date. — — — — — — — — — — — — — — — — — — — ID Known Issue Viewing NI-VISA Options tab on Real-Time controller may hang MAX On PXI and PC Real-Time controllers with VISA Server installed, MAX occasionally may hang when trying to view the VISA Options tab.

Workaround: N/A Reported Version: 4.3 Resolved Version: N/A Added: Slot path shows up incorrectly for multifunction and bridged NI-VISA-based PXI devices PXI devices that are either behind a PCI bridge or have multiple functions (for example, both Ethernet and SCSI device) show an incorrect slot path in MAX when using a driver generated by the VISA Driver Development Wizard. Workaround: N/A Reported Version: 4.3 Resolved Version: N/A Added: VISA Read STB on Mac OS X waits for NI-VISA-defined timeout even if USB device responds sooner VISA Read STB always waits for the timeout defined in NI-VISA before returning, even if a USB device returns a response quicker than the timeout value. Workaround: N/A Reported Version: 4.4 Resolved Version: N/A Added: Third-Party USB device communication may timeout after host PC is put into standby A Windows-based machine communicating with a third-party USB device using a driver not developed by the VISA Driver Development Wizard may timeout if the PC is put into standby mode in the middle of a NI-VISA USB transfer. After the PC is woken up, it thinks the USB device should resend the entire data packet and eventually times out because the packet is not resent. Workaround: N/A Reported Version: 4.4 Resolved Version: N/A Added: NI-VISA does not recognize Bluetooth devices on Windows Mobile On a Windows Mobile device, Bluetooth devices can act as virtual serial devices, giving them a COM port number.

Solved Ni Max On Labview For Mac

NI-VISA cannot recognize this COM port and gives errors when trying to access it through VISA functions. Workaround: Use the non-NI-VISA Bluetooth VIs. Reported Version: 4.4 Resolved Version: N/A Added: Using interrupts with NI-VISA-based PXI cards on NI RT Hypervisor system may cause hang on reboot If you are using interrupts with a PXI card that uses an NI-VISA-based driver on an NI RT Hypervisor system, independent reboot of the RT system may hang if the driver does not have the interrupt disarm sequence defined. Workaround: N/A Reported Version: 4.5.1 Resolved Version: N/A Added: Setting serial baud rate with NI-VISA may return errors from third-party serial drivers NI-VISA may return an error while setting the serial baud rate when using third-party serial drivers, even though setting this same baud rate may work in other third-party applications. This is due to how NI-VISA verifies baud rate settings. Workaround: N/A Reported Version: 4.5 Resolved Version: 15.0 Added: Calling viUsbControlIn on composite USB devices may cause system to blue screen When using viUsbControlIn or VISA USB Control In.vi, if a composite USB RAW device is passed in as the VISA resource, the system may crash with a blue screen.

Workaround: N/A Reported Version: 4.6 Resolved Version: N/A Added: Drivers developed by the VISA Driver Development Wizard on Windows XP Dutch do not install correctly When using the VISA Driver Development Wizard on Windows XP Dutch, the OS does not correctly recognize the.inf file generated. Workaround: N/A Reported Version: 3.4 Resolved Version: N/A Added: NI-VISA leaks Mach ports on Mac OS X when communicating with USB Raw devices When performing a VISA Open and VISA Close on a USB Raw device multiple times inside a loop, the number of Mach ports in Mac OS X increases. This may cause a crash if the code performing these calls is run over an extended period of time. Workaround: Restart the development/run-time environment Reported Version: 3.4 Resolved Version: N/A Added: VISA always adds a parallel port resource VISA will always add a static resource bound to LPT1 in visaconf.ini. If a system does not have a parallel port, this resource will show up with a yellow exclamation mark in MAX. Workaround: Delete the parallel port in MAX Reported Version: 5.0 Resolved Version: 15.0 Added: Two applications simultaneously calling viLock and viUnlock on the same VISA INSTR resource will eventually result in an error Two applications that are both trying to lock and unlock a VISA INSTR resource using viLock and viUnlock will result in one of the applications eventually returning error -: VISA: (Hex 0xBFFF009C) The current session did not have a lock on the resource.